Ceramic particles are made by firing ceramic raw materials through processes such as screening, reasonable grading, molding, and drying. The drying process is one of the more important steps, and its drying condition will have a certain impact on the later use quality.
A. Natural drying of wet billets is to stack the wet billets of ceramic particles on a natural drying site to form stacks, and manually invert the flower racks, and use the atmosphere for natural drying to cool the wet billets into dry billets. The wet billet is dried manually, which is equipped with an artificial drying chamber to dry the wet billet.
B.The artificial drying room is divided into three types: large section tunnel drying room, small section tunnel drying room and chamber drying room. No matter which one is adopted, the wet billet is placed manually or mechanically. Stacks on the drying car are pushed into the drying chamber for drying. The heat medium in the drying chamber generally comes from the waste heat of the sintering kiln or hot air furnace.
In short, choosing the correct method to dry the ceramic particles can effectively improve its hardness and performance in the later stage. If the drying degree is not reached, it will definitely affect the quality of the later use, so the manufacturer must Control the degree of dryness.
